Hardware Installation
User Setup Guide
Gateway
Unboxing: Remove gateway, cord and antennas from its packaging.
Attachments: Connect the power cable to the gateway and arrange the antennas as outlined.
Installation: Position the gateway in a central location of all sensors or group of sensors. The gateway can be mounted to a wall using the supplied hardware. Once mounted connect power cable to source.
Connectivity: A sim card is pre-installed in the gateway for use of data transfer over a secure LTE network.
Sensor
Unboxing: Remove sensor(s) from its packaging.
Installation: Attach the sensor to the asset in which you wish to monitor via the mounting holes using screws, zip ties, or appropriate fastening hardware such as adhesive Velcro pads. Ensure the device is firmly fixed to avoid movement or detachment.
Active Mode: Press the hidden button in the middle of the sensor firmly for 3 seconds, a green light will flash for 30 seconds indicating activation.
